Download removing factory parts please follow the factory repair manual procedures when removing the parts. please remove the negative (-) terminal from the battery. remove the engine undercover panels. ??? remove the front bumper cover. if you have the greddy turbo kit, please remove compression pipe c-2. remove air hoses b/c/d/e and air pipes b/c. remove the factory intercooler. drain the p/s fluid and remove the p/s cooler. disconnect the factory p/s hose as designated by the arrow. relocation kit mount the p/s cooler according to the image cooler installation using the p/s cooler clamps and 6mmx15mm nuts and bolts. use the provided 9mm hoses (960mm and 1070mm) please cut them to fit. the 1070mm hose is installed on the upper portion of the p/s cooler and the 960mm hose should be installed on the lower portion. use the provided hose bands to secure the hose ends.