Download Description Part No: Qty CD Changer 8N8 035 111A 1 Installation kit 8N8 051 229A 1 Rear seat, removal – Remove rear seat bottom. – Disconnect left rear seat belt at body anchorage point. – Remove left rear seat back. – Disconnect left front seat belt body anchor at floor (located at rear of front seat). CAUTION! Part numbers are for reference only. Always check with your Parts Dept. for the latest parts information. Rear trim panel, removal – Remove left rear seat back lock pin. – Carefully remove left rear trim panel starting at top rear of panel. Fastening clips are as shown -arrows-. – Once panel is removed, remove and discard storage compartment from backside of panel (door and trim should remain attached to panel). CD changer bracket fasteners, Installing – Snap in 3 supplied metal screw inserts at locations shown -white arrows-. – Install speed nut to sheet metal flange -black arrow-. – Set both CD changer horizontal / vertical switches to 67.5 (located on each side of CD changer). CD changer to bracket, assembling – Attach mounting bracket to CD changer using 6 supplied screws.