Download Part Number: 8E0 857 925C-6PS Interface 1KO 868 003AAdapterSet Description: iPod Interface Supplier: AGA Fitments: A3 2008+ A4 2008 Only TT 2008+. Step#1: Vehicles with CD ChangerPrep: Using plastic trim tool, remove glove compartment insert. Step#2: Vehicles with CD ChangerPrep: Disconnect CD harness connectorfrom the rearof the glove compartment insert. Place glove compartment insert aside. Step#3: Vehicles with CD Changer: Using 3B7 051 530 removing tool, remove the CD Changer. Step#4: Vehicles with CD Changer: Disconnect CD harness connectorfrom the rearof the CD Changer. Set the CD Changer aside. Step#5 Connect i Pod®harness to the vehicle’s communications connection at the rear of the i Pod®Interface box. iPod®Interface Installation Instructions. Step#6 Slide i Pod®Interface box into the opening, ensuring that the harnessis not pinched. An audible “click” will indicate that the unit is fullyseated. Step#7 Select from the included adaptertrays to fit the owner’s i Pod®type (Note: i Pod® Shuffle orShuffle 1 are not applicable to this installation). Step#8 Position the selected adaptertrayinto the i Pod®Interface box (if required). . Step#9 Place the i Pod®into the adaptertray andslide it ontothe communications connection at the rearof the i Pod® Interface box. Step#10 Select one of the six shims that will securethe iPod®in the adaptertray. Select a shim that does not “wedge” the i Pod®unit in place – the shim is a vibration damper only.