Home Auto Repair Honda Ridgeline Electric Retractable Truck Bed Cover

Honda Ridgeline Electric Retractable Truck Bed Cover

67

Download Honda Ridgeline Electric Retractable Truck Bed Cover Installation Instructions STEP 1: REMOVE CONTENTS & PLYWOOD PACKAGING Remove the canister and top cover from the box. Remove components from inside the canister. Perform a quick inventory to insure all parts are there. Using the 3/8″ wrench or socket remove the 2 bolts holding the plywood packaging supports on the ends of the canister. Discard plywood packaging supports and bolts. DISCARD PLYWOOD PACKAGING AND BOLTS! STEP 2: INSTALL WIRING HARNESS INSTALLATION INSTRUCTIONS 3 HARDWARE USED: WIRE HARNESS x 1 ZIP TIES x 5 (If the optional wire harness Part# BL1120 is used, you may want to tape it to the main harness to ease having to pull them through the bottom of bed separately). In the truck bed, remove the 2 factory bolts from both of the front upper tie down brackets using a #50 torx bit and set aside (for step 4). Remove the 6 factory bolts using a #40 torx bit that hold the front bed panel to the cab. Temporarily remove front bed panel. Find the wire harness and remove the fuse holder from the harness. Tape the 2 wires together where the fuse holder was removed. Carefully feed the end of the wire through the bottom of the bed between the cab and the bottom bed panel. (This step will take one person under the truck with a fl ashlight to see and grab the wire when it exits the bed while being fed down from the top.)