To install the factory DVD player for the Toyota Sienna, you need to use an overhead mounting bracket that makes the process much easier than it sounds. The mounting bracket is installed in place of the dome light, thereby giving you the space to mount the DVD as well as the wires to power it. The entire process for mounting a DVD player in your Sienna uses common household tools and takes an hour to complete.
Tools Used: Tools, Flathead screwdriver, Carpenters knife, Drill with machine tap bit, Phillips-head screwdriver
Install a Factory DVD Player
Loosen the distance between the ceiling and the base of the overhead dome light by using a flathead screwdriver to pry the two apart. When the dome light is loose enough, use your hands to remove it from the ceiling.