Home Auto Repair Ford Expedition Removal/Install Of Window Regulator

Ford Expedition Removal/Install Of Window Regulator

79

Download Removal Instructions STEP 1: Using a plastic trim panel removal tool, insert between the master power switch assembly and gently pry in an upward motion. STEP 2: Disconnect the master power switch assembly. STEP 3: Using a plastic trim panel removal tool, place the tool between the rear view mirror bezel assembly and pry in an outward motion. STEP 3a: Using a plastic trim panel removal tool, place the tool between the interior door trim panel and the rear view mirror bezel assembly, and pry in an upward motion. STEP 4: Remove the rear view mirror bezel assembly. STEP 5: Remove the door trim panel screw. STEP 6: Using a small flat-blade screwdriver, place the screw driver in one of the recessed grooves in the door trim panel marker light assembly. STEP 7: Remove the door trim panel marker light assembly retainer screw. STEP 8: Using an 8 mm wrench, remove the door handle attaching bolt. STEP 9: Remove the door handle assembly through the door trim panel opening. STEP 10: Remove the upper interior door trim retaining screw. The screw is located just above the interior door mechanism. The screw is somewhat obscure. Failure to remove this screw will not allow you to remove the door trim panel. STEP 11: In an upward motion and pulling toward you, remove the door trim panel. Be sure not to completely remove the door trim panel, there are still electrical connectors attached to the door trim panel. STEP 12: Remove the door handle assembly through the door trim panel opening.