Download Installation of the BMW microphone requires removal of the overhead console cover so as to access the wiring for the mic. Below are pictures of the steps for removal of the cover. Gently pry apart the overhead light panel from the back of the panel using a small screwdriver or other suitable tool (butter knife). Using just finger pressure, pull down the cover plate that has the microphone grill in it. Locate the correct three conductor wire. It will be a black connector and should have one wire that in clear in color. Detach the wire from the cable holders so that you have enough wire to reach where the mic goes. Connect the microphone. Here is the mic as you are ready to press it into the grill. Note that the arrow should point toward the front of the vehicle. Reinstall the cover and light panel in the reverse order of removal.