Home Auto Repair 2007 Subaru Outback Limited Engine Ignition

2007 Subaru Outback Limited Engine Ignition

128
Download CAUTION Wear work clothing, including a cap, protective goggles and protective shoes during operation. Remove contamination including dirt and corrosion before removal, installation or disassembly. Keep the disassembled parts in order and protect them from dust and dirt. Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly and replacement. Be careful not to burn yourself, because each part on the vehicle is hot after running. Be sure to tighten fasteners including bolts and nuts to the specified torque. Place shop jacks or rigid racks at the specified points. Before disconnecting electrical connectors of sensors or units, be sure to disconnect the ground cable from battery. SPARK PLUG REMOVAL Spark plug: < Ref. to , SPECIFICATION, General Description.> RH SIDE 1. Disconnect the ground cable from battery. 2. Remove the air cleaner case. < Ref. to REMOVAL , Air Cleaner Case. > 3. Remove the spark plug cords by pulling the boot.