Home Auto Repair 1998 Audi A4 Quattro Headlights, Removing And Installing

1998 Audi A4 Quattro Headlights, Removing And Installing

87
Download NOTE: Removing – Remove turn signal. Refer to Turn Signals – Service and Repair – Procedures See: Turn Signals/Service and Repair Protect bumper using cloth backed tape in headlight area to prevent damage to paint. – Remove bolt (arrow) 6 Nm (53 in lb) – – – Remove two bolts (arrows) 6 Nm (53 in lb) Disconnect headlight harness connector. Disconnect headlight beam adjusting motor harness connector. 1998 Audi A4 Quattro Sedan L4-1.8L Turbo (AEB) – Pull headlight out from peg mount at side (approx. 15 mm), lift slightly and then lift out carefully toward front, rotating if necessary. Installing – – – Install in reverse order of removal. Always align headlights to adjacent body panels (gap clearances) before securing. Adjust headlights after assembly. See: Adjustments