Home Auto Repair 2005 Ford Focus Intake Manifold Removal Installation

2005 Ford Focus Intake Manifold Removal Installation

68
Download Installation All engines 1. NOTICE: If the engine is repaired or replaced because of upper engine failure, typically including valve or piston damage, check the intake manifold for metal debris. If metal debris is found, install a new intake manifold. Failure to follow these instructions can result in engine damage. NOTE: 2.0L engine shown, 2.3L is similar. Inspect and install new intake manifold gaskets if necessary. 2. Install the EGR tube. 3. Position the intake manifold and connect the PCV hose. 4. Connect the KS electrical connector. 2.3L engines 5. NOTE: Be sure to install the bolts in the previously marked locations. NOTE: To ease installation of the intake manifold, lower center mounting bolt, use a 6-inch long, 5/16-inch diameter hose. Install the intake manifold and the seven mounting bolts. 6. NOTE: Lubricate the O-ring with clean engine oil. Install the oil level indicator tube and bolts. 7. Connect the swirl valve electrical connectors and pin-type retainers. 2.0L engines 8. NOTE: Be sure to install the bolts in the previously marked locations. Install the intake manifold and the seven mounting bolts. 9. NOTE: