Home Auto Repair 2002 Ford Windstar Intake Manifold Lower Removal

2002 Ford Windstar Intake Manifold Lower Removal

63
Download CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure. 1. Drain the cooling system. For additional information, refer to Section 303-03. 2. Remove the upper intake manifold. For additional information, refer to Intake Manifold — Upper in this section. 3. Remove the fuel supply manifold. For additional information, refer to Section 303-04. 4. Disconnect the EGR vacuum tube. 5. Disconnect the EGR-to-exhaust manifold tube. Loosen the nut. 6. Disconnect the heater hose. Compress the fitting. Disconnect the hose. 7. Disconnect the upper radiator hose. Reposition the clamp. Disconnect the hose. 8. Disconnect the intake manifold runner control (IMRC). 9. Position the water bypass tube aside. 1. Remove the bolts. 2. Position the tube aside. 10. NOTE: