Home Auto Repair 1998 Ford Windstar Door Glass and Regulator Power Windows Removal Installation

1998 Ford Windstar Door Glass and Regulator Power Windows Removal Installation

63
Download WARNING: IF THE REGULATOR COUNTERBALANCE SPRING MUST BE REMOVED OR REPLACED FOR ANY REASON, MAKE SURE THAT THE REGULATOR ARMS ARE IN A FIXED POSITION PRIOR TO REMOVAL TO PREVENT POSSIBLE INJURY DURING C-SPRING UNWIND. 1. Remove front door trim panel (23942) and front door inside panel sound insulator (20394) . Refer to Section 01-05. 2. Remove inside door belt weatherstrip. 3. Remove front door window glass (21410) as described. 4. Remove two nut and washer assemblies attaching the window regulator equalizer arm bracket (23230) . 5. Remove four rivets for RH side (six for LH side) retaining the front door window regulator base plate to door inner panel. 6. Remove front door window regulator (23200) and front door window channel bracket (23288) from vehicle. 7. Working on a bench, carefully bend tab flat to remove front door window regulator arm slides from front door window channel bracket. 8. NOTE: