Download WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice. In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety Data Sheet (MSDS) if available. Failure to follow these instructions may result in personal injury. CAUTION: Do not spill brake fluid onto painted or plastic surfaces. If spilled, wipe up immediately before damage to the plastic or painted surfaces occurs. 1. Remove the wheel and tire assembly. For additional information, refer to Section 204-00. 2. Remove the parts in the order indicated in the following illustration and table. To remove individual parts, only carry out the listed steps: 3. To install, reverse the removal procedure. 4. If the hydraulic system was opened, bleed the brake system. For additional information, refer to Brake System Bleeding in this section.