Home Auto Repair 2005 Audi A4 Quattro Front Door Panel: Removal and Replacement

2005 Audi A4 Quattro Front Door Panel: Removal and Replacement

67
Download Speed nut (4x) Bolt (4x) Screws (2x) Decorative panel Armrest, lower part Bolt Expanding nut (4x) Door trim – Removing: – Remove lower part of armrest – 5 -. – Remove bolts – 3 – (2x) from door trim – 8 -. – Remove bolts – 6 – from door trim – 8 -. – Unclip decorative panel – 4 -. – Remove decorative panel – 4 – toward front. – Remove bolts – 2 – (4x) from door trim – 8 -. – Unclip door trim – 8 -. – Raise door trim – 8 – upward approx. 20 cm out from door shell. Disengage Bowden cable for interior door mechanism Disconnect electrical harness connectors – Installation: Installation is performed in the reverse order of removal. Note the following: – When installing, speed nuts – 1 – (4x) for expanding nuts – 7 – (4x) must be clipped in. – When installing, door trim must be pressed in the middle to door shell. Disengaging Bowden cable – Disconnect circlip – 3 -. – Pull Bowden cable – 1 – out of guide – 2 – and disengage. NOTE: When installing make sure that catch – 3 – faces upward.