Download 1. Remove the head lamp and turn signal lamp mounting bolts(3ea) and disconnect the wire connectors. Fig. 2: Removing Head Lamp And Turn Signal Lamp Mounting Bolts (3ea) 2. Remove the bumper cover upper mounting bolts and retainers. Fig. 3: Removing Bumper Cover Upper Mounting Bolts And Retainers 3. Remove the bumper cover lower mounting retainers. Fig. 4: Removing bumper cover lower mounting retainers 4. Remove the front bumper cover from the front bumper back beam. 5. Remove the front bumper back beam mounting nuts. Tightening torque: 9~14 Nm (90~140 kg.cm, 6.6~10 lb.ft) 6. Installation is the reverse of removal.