Home Auto Repair Installation Manual TWM Performance Shifter Cable Bushing Kit 2001-2006 Hyundai Elantra 2003+...

Installation Manual TWM Performance Shifter Cable Bushing Kit 2001-2006 Hyundai Elantra 2003+ Hyundai Tiburon

61
Download 1. Working in the engine bay, use a Phillips head screwdriver to remove the 2 screws over the driver’s side headlight and a 10mm socket with a ratchet and an extension to remove the 10mm bolt holding the splash guard. Remove the splash guard from the engine bay. Loosen the 10mm bolt (shown by the top arrow) holding the top part of the air box to the throttle body inlet and unclip the 2 clips holding this part of the air box to the bottom part (also shown by two arrows). Remove the top part of the air box and the air filter as well. 2. Remove the three 10mm bolts at the bottom of the air box using the socket and ratchet with extension. Remove the bottom part of the air box from the engine bay.