Download 1. Remove the battery and the battery tray. For additional information, refer to Section 414-01. 2. Disconnect the breather tube and mass air flow (MAF) sensor. 3. Remove the intake tube and air cleaner cover. 4. Remove the air cleaner assembly. 5. Disconnect the transmission range (TR) sensor. 6. Disconnect the HO2S sensor. 7. Disconnect the transaxle harness connector and remove the wire harness bracket nut. 8. Position the wire harness bracket out of the way. 9. Disconnect the vent hose from transmission filler tube bracket. 10. Unclip the wire harness. 11. Disconnect the shift cable. 12. Disconnect the wire harness from the shift cable bracket to gain access to the bracket bolts. 13. Remove the shift cable and bracket, and position out of the way. 14. Disconnect the starter motor harness connector. 15. Disconnect the ground wire. 16. Remove two starter bolts, and remove the starter motor. 17. Install the special tools.