Download 1. Drain engine oil. 2. Release fuel pressure. 3. Drain coolant by removing cylinder block drain plugs and radiator drain cock. NOTE: Do not spill engine coolant on drive belts. 4. Remove left side ornament cover. 5. Remove air duct to intake manifold, collector, blow-by hose, vacuum hoses, fuel hoses, wires, harness and connectors. 6. Remove the following: Vacuum hoses Water hoses EVAP canister purge hose Blow-by hose 8. Remove EGR guide tube. 9. Remove intake manifold collector supports and intake manifold collector (RH cylinder head only). 10. Remove fuel tube assembly. NOTE: Do not disassemble fuel tube assembly.