Download 1.Jack the front of the vehicle in accordance to manufacture recommendation and support with jack stands, so the front two tires are off the ground. 2. Remove the two front tires/wheels. 3. Disconnect the sway bar end links at the top. 4. Disconnect the brake line from the strut tower.Separate the upper ball joint from the spindle. Use a ball joint separator or other suitable tool. 5. Remove the 3 upper strut mounting nuts on the top off the strut tower. 6. Loosen the lower strut bolt and nut and push the upper control arm up and pull the strut toward you. 8. You may need to grind 1/8 off the factory stud be for your apply the thread lock to the (3) strut studs and install the stud extenders and tighten down. 7.Install the spacer lift on top of the strut plate.