Home Auto Repair 2000 Ford Ranger Torsion Bar Suspension Removal Installation

2000 Ford Ranger Torsion Bar Suspension Removal Installation

69
Download CAUTION: When repairing the power steering system, care should be taken to prevent the entry of contaminants or premature failure of the power steering components can result. 1. Turn the wheel to the straight-ahead position and turn the ignition switch to the OFF position. 2. Remove the wheel and tire assemblies. For additional information, refer to Section 204-04. 3. Disconnect the power steering return hose at the power steering fluid cooler. Drain the fluid into a suitable container. 4. Remove the power steering fluid cooler to crossmember nuts. 5. Disconnect the power steering return hose and remove the power steering fluid cooler. 6. Loosen the tie-rod end jam nuts. 7. Remove and discard the cotter pins and nuts. 8. CAUTION: Do not damage the tie-rod boot when installing the special tool. NOTE: