Home Auto Repair Transaxle Service Manual ’05 Ford Taurus V6-3.0L

Transaxle Service Manual ’05 Ford Taurus V6-3.0L

72
Download Transaxle Service Manual ’05 Ford Taurus V6-3.0L – Removal 1. Remove the battery. 2. Disconnect the mass air flow (MAF) sensor and the breather tubes. 3. Remove the engine air cleaner. 4. Remove the air filter assembly. 5. Remove the battery tray. 6. Disconnect the connectors. 7. Disconnect the connector. 8. Remove the power steering line bracket. 9. Remove the electrical connector bracket. 10. Disconnect the power steering and output shaft speed (OSS) sensor connectors. 11. Disconnect the turbine shaft speed (TSS) sensor connector 12. Remove the manual control lever cable. 1. Remove the nut. 2. Remove the shift actuator cable fitting from the shift cable and bracket. 13. Remove the ground cable and bracket. 14. Remove the cooler line retaining clips. 15. Depress the tabs on the plastic insert retainer and remove the cooler lines from the fitting. 16. Remove the bolts. 17. Install the special tools. 18. Install the special tool on the right hand (back) side of the engine. 19. Install the special tool on the left hand (front) side of the engine. 20. Raise the vehicle. 21. Drain the transmission fluid by lowering the transaxle pan. 22. CAUTION: If the steering gear is removed with the subframe, do not allow the steering wheel to rotate while the steering …