Home Auto Repair 2003 Lincoln LS Headlamp Assembly REMOVAL AND INSTALLATION

2003 Lincoln LS Headlamp Assembly REMOVAL AND INSTALLATION

45
Download Headlamp Assembly NOTE: Make sure the headlamp switch and ignition switch are in the OFF position. 1. To remove individual components, only carry out the following steps. Component Radiator grille opening cover Radiator sight shield Headlamp assembly 2. View 1 of 2. Remove the components in the order indicated in the following illustration and table. 3. View 2 of 2. Remove the components in the order indicated in the following illustration and table. 4. To install, reverse the removal procedure. Item 2: Radiator Grille Opening Cover Removal Note 1. Position the ambient air temperature sensor aside. Item 6: Standard Headlamp Disassembly Note 1. To remove individual components, only carry out the following steps. Component Low beam bulb High beam bulb Side marker module 2. Disassemble the components in the order indicated in the following illustration and table. Steps 1-2, 4-5 6-7, 9-10 11-14 3. To assemble, reverse the disassembly procedure. Items 5 and 10: Low and High Beam Bulb Removal Note WARNING: The headlamp bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. Failure to follow these instructions may result in personal injury.