Download 1. Disconnect battery ground cable (14301) . Refer to Section 14-01. 2. Remove steering wheel (3600) as described. 3. Remove steering column from vehicle as described. 4. Remove steering column lower yoke (3N725) , steering column upper bearing spring (3520) , suspension height sensor control ring (3C131) and steering column bearing tolerance ring (3L539) . Lower Steering Column Assembly 5. Remove turn indicator cancel cam (13318) by pushing up with flat-bladed screwdriver. Note direction of flush surface. 6. Remove ignition switch (11572) . 7. Remove bearing retainer (3C610) and steering column upper bearing spring . 8. Remove steel steering column bearing tolerance ring and steering column bearing sleeve (3518) . 9. Remove plastic bearing retainer from ignition switch lock cylinder bore. 10. Remove metal steering column lock housing bearing (3E700) from ignition switch lock cylinder bore. 11. Note position of steering column lock gear (3E717) to actuator lock. Remove steering column lock gear . 12. Remove two pivot bolts. Use caution as steering column position spring (3D655) will release when bolts are removed. Remove steering column lock cylinder housing (3511) .