Home Auto Repair A/C-Heater Systems Service Manual ‘02 Chevrolet Impala

A/C-Heater Systems Service Manual ‘02 Chevrolet Impala

64
Dwonload A/C-Heater Systems Service Manual ‘02 Chevrolet Impala – Removal 1. Remove the following component: For a 3.4L engine, remove the air cleaner assembly. For a 3.8L engine, remove the fuel injector sight shield. 2. Drain the coolant. Use Hose Clamp Pliers in order to position aside the heater hose inlet and outlet clamp at the heater core. See Fig. 41 . Disconnect the inlet and outlet heater hose from the heater core. Remove the right and left insulators. Remove the floor carpet around heater core area. 3. Remove the rear floor air outlet duct from the holes in the floor reinforcement. Disconnect the rear floor air outlet duct from the heater core outlet cover. See Fig. 31 . Remove the bolts from the vacuum harness bracket and position bracket aside. 4. Remove the screws from the heater core outlet cover. Remove the heater core outlet cover. See Fig. 32 . Remove the screws from the heater core cover. Remove the heater core cover. Remove and discard the seals from the heater core cover. See Fig. 33 . Remove the caulk from the heater core cover. 5. Remove and discard the outer seal from the heater core. See Fig. 34 . Remove the screw from the heater core line clamp. See Fig. 35 . Remove the heater core retaining clamp.