Download WARNING: A transient excessive rigidity (25,000 V) happens at the bulb sockets of the excessive intensity discharge (HID) lamps when the combination light change is turned ON. It might trigger critical electrical shock or electrocution if you don’t observe the cautions below. CAUTION: – By no means turn on the mixture gentle switch before becoming the HID bulbs to their bulb sockets and finishing the reassembly of the headlight assembly. – Don’t service the headlights meeting in wet conditions, corresponding to rain or snow, close to a sprinkler system, or when your hands are moist to stop electrocution. – Don’t touch the surface of the HID bulbs with your naked fingers and don’t stain it with any oils and fats. – Don’t disassemble the inverter unit and the ignitor unit. – Don’t turn on the HID bulb by using an influence supply aside from the battery mounted in your vehicle. 1. 2. 3. 4. Be sure you have the anti-theft code for the radio and the navigation system, then write down the frequencies for the radio’s preset buttons.