Download 2000 Jaguar S-Type V8-3996cc Cylinder Head Repair Manual – 1. Set up a new cylinder head gasket to the cylinder block face. 2. Set up the cylinder head. 3. Install the cylinder head bolts, don’t totally tighten.4. Stage 1 – tighten bolts in sequence, to twenty Nm.5. Stage 2 – tighten bolts in sequence, to 35 Nm.6. Stage 3 – tighten bolts in sequence by ninety° .7. Stage 4 – tighten all M10 bolts in sequence by ninety° .8. Stage 5 – tighten the bolts at the entrance of the cylinder head.9. NOTE: Lubricate every tappet assembly. Set up the tappet and shim assemblies. 1. Set up every tappet and shim meeting to its previously identified position in the cylinder head. 10. Install the exhaust camshaft. For additional data, check with Camshaft, Lifters and Push Rods. 11. Install the intake camshaft. For added information, seek advice from Camshaft, Lifters and Push Rods.