Home Auto Repair '98 GMC S15/T15 Jimmy Power Steering Pump Repair Manual

'98 GMC S15/T15 Jimmy Power Steering Pump Repair Manual

78
Download ’98 GMC S15/T15 Jimmy Power Steering Pump Repair Manual – On-Vehicle Service REMOVE OR DISCONNECT ^ Tools Required: – J 25034-B Pulley Remover Place a drain pan below the pump. 1. Hoses. Cap the hoses. 2. Unload the tensioner assembly. Refer to Engine. 3. Belt. 4. Pulley. – Install J 25034-B. Be sure the pilot bolt bottoms in the pump shaft by turning the nut to the top of the pilot bolt. Hold the pilot bolt. Turn the nut counterclockwise. 5. Filler neck tube. 6. Rear brace nut from engine stud. Front mounting bolts. 8. Power steering pump. INSTALL OR CONNECT Tools Required: – J 25033-B Pulley Installer 1. Power steering pump. 2. Front mounting bolts. Tighten – Bolts to 50 Nm (39 ft. lbs.). 3. Rear brace. 4. Nut and bolt. Tighten – Nut to 41 Nm (31 ft. lbs.). 5. Filler neck tube. Tighten – Filler neck tube bolt to 20 Nm (15 ft. lbs.). 6. Pulley.