Home Auto Repair 2012 Honda Fit Cargo Liner Installation Instructions

2012 Honda Fit Cargo Liner Installation Instructions

76

Download Installing the Cargo Liner 1. Open the tailgate. Install the three loops on the center cargo liner under the rear seat headrests. 2. Pull the knobs and fold down the left and right seat-backs. Position the center cargo liner on the left and right seat-backs. Secure the center cargo liner to the left and right seat-backs with 10 hook-and-loop fasteners. 3. Position the center cargo liner on the cargo area floor. Secure the center cargo liner to the cargo area floor with six hook-and-loop fasteners. 4. Lift the cargo area floor. Install the two straps on the center cargo liner around the edge of the cargo area floor. 5. Lower the cargo area floor. 6. Position the center cargo liner on the cargo area floor. Fold over the rear corners. Using an alcohol swab, clean the areas where the fastener pads will attach. 7. Attach two fastener pads to the center cargo liner fasteners as shown. 8. Remove the adhesive backings from the two fastener pads, position the center cargo liner, and attach the two fastener pads to the cargo area floor. Installing the Left Cargo Liner 9. Position the left cargo liner on the cargo area left side trim panel. Fold back the edge of the left cargo liner. Using an alcohol swab, clean the areas where the 13 fastener pads will attach. 10. Attach 13 fastener pads to the fasteners on the left cargo liner as shown. 11. Remove the adhesive backings from the 13 fastener pads, position the left cargo liner, and attach the 13 fastener pads to the cargo area left side trim panel. Installing the Right Cargo Liner 12. Install the two hooks on the right cargo liner to the recess in the cargo area right side trim panel.