Home Auto Repair 1995 – 2001 VAUXHALL Vectra 2.5 i Poor starting from cold

1995 – 2001 VAUXHALL Vectra 2.5 i Poor starting from cold

61
Download Disconnect battery. Disconnect harness multi-plug from engine coolant temperature (ECT) sensor Fig.1 [2] . Disconnect harness multi-plug from mass air flow (MAF) sensor Fig.1 [4] . Remove protective cover Fig.1 [1] . Remove plastic tube from wiring harness Fig.1 [3] . Remove insulation tape from wiring harness. Cut engine coolant temperature (ECT) sensor wiring and remove from cable ducting. Cut new engine coolant temperature (ECT) sensor wiring a minimum of 120 mm long. Fit new wiring harness multi-plug to wires Fig.2. Repair wiring with repair kit listed. Seal with insulation tape Fig.3. Remove engine coolant temperature (ECT) sensor. Fit modified engine coolant temperature (ECT) sensor. Tightening torque: 18 Nm. Refit wiring harness multi-plug. Reconnect battery. Erase fault memory.