Download How to Install Advanced Cargo Net on 2010 Honda Accord – 1. If equipped, remove the rear shelf. 2. Remove the rear cargo floor lid, left cargo floor lid, and right cargo floor lid. 3. Remove the cargo box. 4. Pry open the bolt cover, and remove the left cargo tray bolt. 5. Remove the left cargo tray (two clips). 6. Repeat steps 4 and 5 to remove the right cargo tray. 7. Pull away the weatherstrip in the area shown. Remove the rear trim panel (two push clips, four clips, and four tabs). 8. Using a plastic trim tool, remove the tie down hook cover. Remove the tie down hook (one bolt). 9. Using a plastic trim tool, remove the left side liner plastic cover. Remove the two screws under the cover. 10. Release the rear portion of the left rear side liner: • Pull away the weatherstrip. Pull back the upper edge of the left rear side liner to release the retaining tabs. • Pull out the back edge of the left rear side liner by hand to detach the four clips. • Be careful not to crease the left rear side liner. 11. Repeat steps 8 thru 10 to release the right rear side liner. Installing the Anchors 12. Place a shop towel over the cargo area under the left rear side liner, and insert an empty box.