Home Auto Repair 2009 Ford F-150 Borla Performance Cat-Back Exhaust System Installation

2009 Ford F-150 Borla Performance Cat-Back Exhaust System Installation

124
Download This Borla Performance Cat-Back™ Exhaust System (Part number 140291) has been designed for the 2009 Ford F-150 Extended cab or Crew cab, short bed equipped with a 4.6L or 5.4L V-8 engine, 2 or 4-wheel drive and automatic or manual transmissions. Original Exhaust System Removal Note: With a used vehicle, we suggest a penetrating spray lubricant to be applied liberally to all exhaust fasteners and allowing a significant period of time for the chemical to lubricate the threads before attempting to disassemble. 1. Unbolt the flange located in front of the muffler assembly as shown in figure 1. Place hardware to the side for use during the installation of your new exhaust system. 2. Lubricate all hangers and rubber isolators. 3. Using a muffler stand or an additional person to hold the exhaust system up in place, remove the hangers from the rubber isolators and remove the exhaust system from the vehicle as shown in figure 2. 4. Unbolt the clamp and remove front pipe from your original exhaust as shown in figure 3. Place front pipe to the side for use during the installation of your new exhaust system.Borla Performance Cat-Back ™ Exhaust System Installation