Download 2001 Pontiac Sunfire Cylinder Head Service Manual – 2. Relieve the fuel system pressure. 3. Drain cooling system. 4. Remove the alternative fuel module assembly. Remove the drive belt. 5. Remove the air cleaner outlet duct and resonator assembly. 6. Support engine using floor jack and block of wood. 7. Remove the engine mount. 3. Remove the intake manifold. 9. Remove the exhaust manifold. 10. Disconnect the Engine Coolant Temperature Sensor (ECT) electrical connection. 11. Remove the valve rocker arm cover. Important: When removing valve train components keep them in order. Do this to ensure that the components are installed in the same locations and with the same mating surfaces as when removed. 12. Remove the rocker arms and pushrods. 13. Remove the generator. 14. Remove the generator rear brace. 15. Remove the power steering pump. Position the pump aside with the lines attached. 16. Remove the radiator inlet pipe. 17. Remove the ignition coil assembly.