Download 2005 Land Rover Range Rover Fuel Rail Service Manual – Before disconnecting the battery, ensure all text and cautions in the battery disconnection section are observed. Remove 1. Disconnect battery earth lead. 2. Remove air intake hose. 3. Remove LH ignition coil cover. 4. Remove RH ignition coil cover. 5. Disconnect multiplugs from ignition coils. 6. Disconnect multiplugs from throttle body, thermostat heater, CMP sensor and ECT sensor. 7. Cut 2 cable ties and release engine harness. 8. Disconnect multiplugs from VCC solenoids. 9. Release VCC multiplug harness from clip. 10. Disconnect multiplug from charcoal canister purge solenoid valve. 11. Disconnect alternator multiplug. 12. Release alternator harness from 4 clips. 13. Disconnect multiplugs from KS and CMP sensor. 14. Remove 2 nuts securing fuel injector harness to fuel rail. 15. Release vacuum reservoir and mounting bracket from LH fuel injector harness securing stud. 16. Remove fuel hose and mounting bracket from LH fuel injector harness securing stud.