Home Auto Repair How to Install Door Handle on Lamborghini Gallardo

How to Install Door Handle on Lamborghini Gallardo

93

Download How to Install Door Handle on Lamborghini Gallardo – 1. Place a towel into the door handle. 2. Using a screw driver at the top of the inside of the handle, give a quick tap to separate the outside shell from the middle and inside pieces. Even if you were able to separate the two pieces in a more gentle way, the parts are scrap as all of the clips and tabs that keep the shells tight are weakened once installed and removed. 3. Disconnect the door locking switch. 4. Remove the lock switch from the stock piece. 5. Using the T-25 Torx, remove the upper bolt holding the middle door handle in place. 6. Using the T-25 Torx, remove the lower bolt holding the middle door handle in place. Remove the handle. 7. Now we begin to remove the door panel. 8. Remove the T-20 screw at the bottom of the speaker grill. 9. Slide the grill vent forward. Do not try to muscle it. It will come out with some gentle pulling forward. 10. Remove the T-20 bolt located to the lower left (driver’s side) or lower right of the speaker. 11. Remove the white courtesy light from the bottom of the door using the MAcarbon chisel tool. Look for the small indent at the end of the light to insert the tool.