Home Auto Repair 2002 GMC K 1500 Yukon Camshaft Position Repair Manual

2002 GMC K 1500 Yukon Camshaft Position Repair Manual

80
Download 2002 GMC K 1500 Yukon Camshaft Position Repair Manual – REMOVAL PROCEDURE IMPORTANT: Clean the area around the camshaft position (CMP) sensor before removal in order to prevent debris from entering the engine Camshaft Position Sensor (CMP) 1. Remove the engine sight shield, as necessary. 2. Disconnect the CMP sensor electrical connector. 3. Remove the CMP sensor bolt. 4. Remove the CMP sensor. INSTALLATION PROCEDURE Camshaft Position Sensor (CMP) 1. Install the CMP sensor. NOTE: Refer to Fastener Notice in Service Precautions. 2. Install the CMP sensor bolt. Tighten Tighten the bolt to 25 N.m (18 lb ft) . 3. Connect the CMP sensor electrical connector. 4. Install the engine sight shield, as necessary