Download 2002 Volvo S40 Rear Brake Replacement Instructions – 1. Park the S40 on a level surface. Loosen the wheel lug nuts on the rear wheels with the tire iron. 2. Use the floor jack to lift the rear of the car floor. Stabilizes the vehicle with jack stands for points placed under the cat back to S40. 3. Removes loose wheel lug nuts. Remove the wheel hub to reveal heard over the brakes. 4. Uses a ratchet and a tubing set to remove two bolts at the rear retainers brake caliper. Lift the caliper off the rotor and the brake pads detuned gauge outside. Hang the caliper with wire automobile mechanic. 5. Use brake cleaner to remove any dirt and debris from the calibrator. Rotates the piston within the housing of the brake caliper tool retraction of the brake piston. 6. The wear indicator attached to the bottom of the inner brake pad. Insert the brake pad in the caliper and the caliper on the lower rotor. Newly inserted into the caliper retaining bolts and adjust them with the ratchet and socket set. Repeat for the other side. 7. Mount the wheel on the hub and holds back the wheel studs. Tighten the lug nuts by hand before lowering the vehicle to the ground. 8. Remove the brackets for the jack and lowering the vehicle with the floor jack. Adjusts the studs using the wrench.