Home Auto Repair ’98 Chevy S Instrument Panel Assembly Rotating Repair Manual

’98 Chevy S Instrument Panel Assembly Rotating Repair Manual

83
Download ’98 Chevy S Instrument Panel Assembly Rotating Repair Manual – 1. On vehicles equipped with a manual transmission, remove the shift lever. 2. On vehicles equipped with an automatic transmission, perform the following steps: 2.1. Apply the park brake. 2.2. Insert the ignition key and turn the ignition switch to the RUN position. 2.3. Depress the brake pedal and shift the transmission to the 1 position. 2.4. Turn the ignition switch to the OFF position. CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices. 3. 4. 5. 6. 7. 8. 9. 10. Disconnect the battery negative cable. Remove the left sound insulator. Remove the right instrument panel sound insulator. If the vehicle is equipped with a multiple CD changer located in the center console, remove the center console. Remove the center sound insulator. Remove the lower left instrument panel mounting bolt. Remove and retain the instrument panel storage compartment. Remove the lower right instrument panel mounting bolt. 11. Remove and retain the left and right speakers and the speaker grilles. 12. Use a flat-bladed tool in order to remove the windshield defroster grille. Retain the grille and sunload sensor for use on the next IP carrier. 13. 14. 15. 16. If equipped with a sun load temperature sensor twist the sensor 1/4 turn counterclockwise in order to disengage.