Download How to Install Rear Brake Line Kit on Honda CBR1000RR – Identify the important thing parts that complete our brake line kit: It’s best to have one (1) line, two (2) single banjo bolts and one (1) c-clip. Now we have also included a total of six (6) washers; 4 (four) will be used, and two (2) might be spares. We strongly recommend having a professional mechanic install your brake traces, all different installs may void your warranty. To ensure there isn’t any paint harm from the brake fluid, completely cover the rear finish of the bike. Installing brake traces generally is a messy course of, and brake fluid WILL spill! After bleeding and drying out the OEM brake system, uninstall your rear inventory hose. Pay attention to how the stock system was routed in case you’ll want to re-install the hose. Determine which end of your new Galfer brake line to install on the rear grasp cylinder. Set up this finish to the master cylinder utilizing a single banjo bolt and two (2) washers, the sequence shall be as follows; master cylinder, washer, banjo becoming, washer, single banjo bolt.