Download Mitsubishi Outlander Inner Carrier Base Bar Care & Handling – • Be sure to check the fasteners for looseness and tighten if necessary before and after driving. • If you hang a luggage from this product by a hanger, etc., pay attention to its weight. Max. load: 10 kg • When you carry any luggage using this product, drive carefully. Avoid sudden steering, braking and abrupt acceleration. • When this product is mounted, the third-row seat cannot be used. • When this product is mounted, the reclining angle of the rear seat is restricted. Do not recline the rear seat- back any further if it contacts with the base bar. If further reclining is needed, remove the base bars or relo-cate them so as not to interfere with the seatback. • To change the position of a base bar, loosen both adjust knobs and slide the bar evenly on both sides. • When re-installing the removed product, check that there is no missing part and there is no damage on the product, then follow the installation procedure. • Rust may occur if the paint or coating of this product is damaged. Repair the damaged area using a touch-up paint.