Download 2000 Dodge Truck Dakota Radiator Service Manual – REMOVAL WARNING: DO NOT REMOVE CYLINDER BLOCK DRAIN PLUGS OR LOOSEN RADIATOR DRAINCOCK WITH SYSTEM HOT AND UNDER PRESSURE. SERIOUS BURNS FROM COOLANT CAN OCCUR. 1. Disconnect battery negative cable. 2. Drain cooling system. CAUTION: A number or letter is stamped into the tongue of constant tension clamps. If replacement is necessary, use only an original equipment clamp with matching number or letter. 3. Remove hose clamps and hoses from radiator. Disconnect coolant reserve/overflow tank hose and washer bottle electrical connector and hose. 4. Remove upper fan shroud mounting screws Lift upper fan shroud assembly up and out of engine compartment. 5. Disconnect electric cooling fan motor connector.