Download Removal 1. On vehicles equipped with a manual transmission, remove the shift lever. 2. On vehicles equipped with an automatic transmission, perform the following steps: A. Apply the park brake. B. Insert the ignition key and turn the ignition switch to the RUN position. C. Depress the brake pedal and shift the transmission to the 1 position. D. Turn the ignition switch to the OFF position. CAUTION: Before servicing any electrical component, the ignition and start switch must be in the OFF or LOCK position and all electrical loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its components. Disconnect the battery negative cable. Remove the left sound insulator. Remove the right instrument panel sound insulator. If the vehicle is equipped with a multiple CD changer located in the center console, remove the center console. 7. Remove the center sound insulator. 8. Remove the lower left instrument panel mounting bolt. 9. Remove and retain the instrument panel storage compartment. 10. Remove the lower right instrument panel mounting bolt. 11. Remove and retain the left and right speakers and the speaker grilles.