Home Auto Repair Installation Instructions & Manual Edge Evolution Programmer Ford F-Series Power Stroke 7.3L...

Installation Instructions & Manual Edge Evolution Programmer Ford F-Series Power Stroke 7.3L 1994-2003

59

Download 1. After turning the key ON (do not start the engine) and pressing , the screen displays the following message. 2. The Evolution will check the PCM and determine if it is in the Master Calibration list. If the calibration is available, you will see the following message. 3. You will then be instructed to turn the key OFF, Press and turn the key back to ON (do not start) to begin saving STOCK. 4. If this is the first time the unit is used on a particular vehicle, the Evolution will build and verify the modified calibrations (Skip to step 5 for subsequent programming operations). During this process, you will see the following displays. 5. Once storing is complete, you will see the following display: Select your desired option by pressing the arrow keys and pressing . Depending on your selection, you will see one of the following displays. 6. Press to continue or to return the Choose a Program menu. 7. After pressing to verify the calibration selection, the following screen appears.