You have to make sure that the brake rotors on your Toyota Land Cruiser stay in good condition. There should be no grooves on the surfaces and no warping. A brake rotor could warp if it gets very hot and then go through a puddle of cold water. Not cleaning the wheel hub properly when you service the brakes can cause “run-out,” another sort of warping. If you take the rotor off for any reason, you need to clean the wheel hub thoroughly with a wire brush.
Tools Used: Tools, Wheel chocks, Automobile jack, Jack stand, Wire ties, Pliers, Socket set
Install the Rear Rotors
Place the wheel chocks in front of the front wheels of the Land Cruiser. Raise the rear of SUV with the automobile jack. Place a jack stand under it near the jacking point and raise it to the frame. Remove the lug nuts with the lug wrench and pull the wheel from the Toyota.