Home Auto Repair 2004-2005 Honda Civic Si Fog Lights Installation Instructions

2004-2005 Honda Civic Si Fog Lights Installation Instructions

70

Download INSTALLATION 1. Make sure you have the anti-theft code for the radio, then write down the radio station presets. 2. Disconnect the negative cable from the battery. 3. Remove the front bumper: • Remove the four clips from the top of the bumper. • Remove the six clips and two self-tapping screws from the bottom of the bumper. • Remove the two self-tapping screws from both ends of the bumper. • Pull out on both ends of the bumper to release the clips, then pull the bumper forward so that you can reach behind it, and disconnect the side marker lights. • Place the bumper on a blanket or a piece of cardboard to protect it while you are installing the fog lights. 4. Using scissors, cut out template A, and place it on the bumper grille by aligning the upper edge with the left upper edge of the bumper grille as shown. Tape the template. Using a pushpin, mark the bumper grille as indicated on the template. 5. Cut out template B, and tape it onto the bumper grille by aligning the lower edge with the left lower edge of the bumper grille as shown. Using a pushpin, mark the bumper grille as indicated on the template. 6. Cut out the template C, and tape it onto the front bumper by aligning the inner edge with the left edge of the bumper grille as shown. Using a pushpin, mark the bumper grille as indicated on the template. Using a felt-tip pen, mark the bumper grille along the outer edge of the template as shown.