Download 2013 Honda CRV All Season Floor Mats Installation Instructions Installation NOTE: • Remove the standard floor mats before installing the all-season floor mats. • An anchor is required for the driver’s side of the vehicle; the anchor prevents the mat from sliding forward and possibly interfering with the pedals. • If you remove the all-season floor mat, make sure you reanchor it when you put it back in your vehicle. • If you replace the all-season floor mat, use factory all-season floor mat designed to be used with the anchor. • If you use a non-factory mat in the driver’s foot well, make sure it fits properly and that it can be used with the anchor. • Do not put additional mats on top of the anchored mat, otherwise the additional mats may slide forward and possibly interfere with the pedals. • Identify each mat by the marks on the back of each mat: the mat marked “R” or “Passenger’s side” go on the right side of the vehicle; the mat marked “L” or “Driver’s side” go on the left side. 1. Install the rings in the driver’s all-season floor mat over the anchors. Turn the knob on each anchor 90° to secure the driver’s all-season floor mat. 2. Position the passenger’s all-season floor mat as shown. If equipped with a subwoofer, insert the rear portion of the passenger’s all-season floor mat under a subwoofer. 3. Position the rear all-season floor mat as shown.