Download Installation NOTE: • Before installing the all-season mats, check the installation positions. • Anchors are required to prevent the mats from sliding forward and possibly interfering with the pedals. • When replacing the all-season mats, use all-season mats that are compatible with the anchors. • Do not place an additional mat on top of the all-season mats. Any additional mats may slide forward and possibly interfere with the pedal. • Make sure to re-anchor the standard mats after removing the all-season mats. 1. Unlock the anchors, and remove the standard floor mats. 2. Install the front all-season mat over the three knobs on the floor. 3. Turn the knob on each anchor to secure the front all-season mat as shown. 4. Install the second row all-season mat over the two knobs on the floor. 5. Turn the knob on each anchor to secure the second row all season mat as shown. 6. Position the third row all-season mat on the floor as shown.