Download 2011 Honda Pilot Crossbars Installation Instructions Installation NOTE: • The weight of cargo must not exceed the maximum weight capacity of 75 kg (165 lbs). • Clean the roof rails before installing the crossbars. • Do not damage the roof and other finished surfaces of the body when installing the crossbars. Installing the Crossbars 1. Remove the rear covers from the roof rails by disengaging two clips each. 2. Slide the crossbars into the roof rails with the adjustment screws on the passenger’s side of the vehicle. Align the marks on the crossbars with the marks on the roof rails as shown. Make sure the crossbars are inserted in the correct position and direction. 3. Tighten eight thumb wheel screws to secure the crossbars to the roof rails. 4. Install two Torx bolts to the roof rails securely. 5. Reinstall the roof rail covers. Make sure they are securely snapped into place. USE AND CARE • Check the roof rails and crossbar mounting bolts frequently, and retighten if necessary. • Distribute the weight of the cargo evenly, and do not exceed the maximum weight capacity of 75 kg (165 lbs).