Home Auto Repair 2012 Honda Pilot Fender Trims Installation Instructions

2012 Honda Pilot Fender Trims Installation Instructions

89

Download INSTALLATION Installing the Left Front Bumper Trim and the Left Front Fender Trim 1. Using a pushpin, make small holes through the center of the two dimple marks on the front bumper. 2. Slide the two spring nuts over the two small holes made in step 1 on the front bumper. 3. Check the position of the left front bumper trim and the left front fender trim to the front bumper and the left front fender. Remove the left front bumper trim and the left front fender trim. 4. Using the alcohol swab, thoroughly clean the area where the left front bumper trim and the left front fender trim will attach. 5. Peel back 1 to 1½ inches of the adhesive backing, and tape it to the front surface of the left front bumper trim. Remove the remaining adhesive backings from the left front bumper trim. 6. Align the edge of the left front bumper trim with the curved end of the front bumper as shown. Attach the left front bumper trim to the front bumper. 7. While applying light pressure against the left front bumper trim, carefully remove the taped adhesive backing. 8. Secure two self-tapping screws to the left front bumper trim. 9. Remove one clip from the left front inner fender as shown. 10. Peel back 1 to 1½ inches of the adhesive backing, and tape it to the front surface of the left front fender trim. Remove the remaining adhesive backings from the left front fender trim. 11. Align the edge of the left front fender trim with the curved end of the left front fender as shown.