Download CHRYSLER ALTERNATOR See Figures 1, 2, 3, 4 and 5 Fig. 1: Alternator mounting-2.2L and 2.5L engines Fig. 2: Disconnecting alternator wiring-2.2L and 2.5L engines Fig. 3: Disconnecting alternator wiring Fig. 4: Removing the pivot bolt and nut Fig. 5: Removing the alternator from the vehicle Disconnect the negative battery cable. Label and disconnect the wiring (for easy installation). Remove the air conditioning compressor drive belt, if equipped. Loosen the alternator adjusting bracket bolt and adjusting bolt. Remove the alternator belt. 5. Remove the bracket and mounting bolts. 6. Remove the pivot bolt and nut. 7. Lift the alternator from the vehicle. When lifting the alternator out of the vehicle on some years with A/C, clearance may be restricted by the condenser cooling fan assembly or the A/C compressor and mounting bracket assembly, if so, removal of one of these items will be necessary. 8. Position the alternator against the engine. 9. Install the pivot bolt and nut. 10. Install the mounting bracket bolts, and adjusting bolt. 11. Install drive belts and adjust to specification. 12. Tighten all the mounting bolts and nuts. 13. Connect all alternator terminals. 14. Connect the negative battery cable. Disconnect the negative battery cable. Disconnect the wiring and label for easy installation. Remove the air conditioning compressor drive belt.