Home Auto Repair Jaguar S-Type Accelerator Pedal Installation Instructions

Jaguar S-Type Accelerator Pedal Installation Instructions

156
Download Modify the accelerator pedal to it’s lowest position. Proper-hand drive automobiles 2 . Take away the motive force facet cowl side trim panel. 1) Detach the entrance door aperture seal. 2) Remove the driving force side cowl facet trim panel.three . Disconnect the accelerator pedal electrical connector. four . Remove the accelerator pedal bracket retaining pin. 1) Remove the retaining clip. 2) Take away the accelerator pedal bracket retaining pin.5 . Utilizing an acceptable T30 Torx key, remove the accelerator pedal retaining screw. 6 . Remove the accelerator pedal.1 . Set up the accelerator pedal. Loosely set up the accelerator pedal retaining screw. 2 . Reposition and align the accelerator pedal. Utilizing an appropriate four mm ball ended hexagonal key, install the 1) accelerator retaining screw into the accelerator pedal housing. 2) Reposition and align the accelerator pedal.